Chromium comes in two common forms with very different risks. Hexavalent chromium, Cr(VI), used in metal plating, leather tanning and other industries, is highly toxic and dissolves easily in water, so it travels through groundwater. Trivalent chromium, Cr(III), is far less toxic and tends to stay put as solid minerals. Turning Cr(VI) into Cr(III) is therefore one of the main goals of chromium clean-up, and biochar can help do it.
But how do you know, in a contaminated aquifer, whether chromium has actually been converted to the safer form, or simply stuck to something from which it could later be released? A 2026 study in the Journal of Hazardous Materials Advances by Filip Budimir, Carol Ptacek, Richard Amos and David Blowes used chromium isotopes to find out.
Study at a glance
- Type: laboratory flow-through cell experiment, with water flowing continuously through the biochar
- Material: oak-based biochar
- Method: chromium isotope ratios in the outflowing water, plus X-ray absorption spectroscopy of the biochar afterwards
- Source: Budimir et al. (2026), Journal of Hazardous Materials Advances 22, 101122
Isotopes as a chemical fingerprint
Chromium atoms come in slightly different weights, called isotopes. When Cr(VI) is chemically reduced to Cr(III), the lighter isotopes react a little faster, so the Cr(VI) left behind in the water becomes gradually “heavier”. Measuring this shift (reported as δ53Cr) is a way of tracking reduction in groundwater without digging up the aquifer. How large the shift is depends on what is driving the reaction, so researchers need to calibrate it for each treatment material.
An earlier study had measured this for biochar in static, still-water conditions. This one asked whether things change when water is flowing, as it does in a real aquifer.
What they found
- Both sorption and reduction happened. X-ray absorption spectroscopy of the biochar grains after the experiment found both Cr(III) and Cr(VI), showing that some chromium had been reduced and some was still attached in its toxic form.
- The isotope signal grew as Cr(VI) fell. As Cr(VI) concentrations in the outflow dropped, δ53Cr values increased, as expected for reduction.
- Two stages, not one. Unlike the earlier static study, the data were better described by two separate curves. The first, with a small isotope effect (ε = −1.01‰), was linked to Cr(VI) sticking to and diffusing into the biochar particles. The second, with a larger effect (ε = −3.19‰), was linked to Cr(VI) being reduced by the biochar.
What to keep in mind
- A method study. The main contribution is a better way to interpret isotope data at biochar-treated sites, not a measure of how much chromium biochar removes.
- Not all chromium was converted. Some Cr(VI) remained on the biochar, which matters for long-term safety if conditions change.
- Laboratory column. A flow-through cell is closer to an aquifer than a beaker, but real sites have more variable water chemistry and flow.
Why it matters
If biochar is used to treat chromium-contaminated groundwater, regulators and engineers need evidence that the toxic form is really being converted, not just temporarily held. This study shows that under flowing conditions, isotope data should be interpreted as a two-stage process. Using a single-stage model, as earlier work did, could misjudge how much reduction is actually taking place.
Reference
Budimir, F., Ptacek, C. J., Amos, R. T., & Blowes, D. W. (2026). Evaluating chromium isotope fractionation during the removal of hexavalent chromium by oak-based biochar under saturated flow conditions. Journal of Hazardous Materials Advances, 22, 101122. https://doi.org/10.1016/j.hazadv.2026.101122

